Anam logo

Is Anam Down?

AI & Machine LearningLive status, outages, and incident history

No. Anam is up right now.

Every monitored Anam system is operational as of November 14, 2026. PulsAPI did not find an outage in its latest check of the official status feed.

OperationalChecked 5m agoLive · every 60s

Know the moment Anam breaks

Anam is healthy right now. We keep checking (every 60 seconds) and email you when that changes.

Free, no password, no card. Unsubscribe in one click.

Official Anam status page
How we know: the official Anam status page, PulsAPI's own check (every 60 seconds), and outage reports from engineers. How PulsAPI monitoring works

Status report

Anam Status Summary

As of 10:05 UTC on 14 November 2026, Anam is operational. PulsAPI checked Anam's official status page and found 4 of 4 components operational, with no active incidents. The latest incident, "WebRTC sessions are failing to start", was on Sep 23, 2026 and lasted 13 min.

Cite as: PulsAPI, “Anam status”, checked 14 November 2026, 10:05 UTC. https://www.pulsapi.com/services/anam

Anam Component Status

The main Anam systems on this page. All 4 are operational right now.

4operational
API
Operational
Lab
Operational
Persona sessions
Operational

1 more components tracked

Their status is in the bar above. Free accounts see every component by name.

Also tracking Website.

See all of them free

Component statuses may change independently during partial outages.

Recent Anam Outages & Incidents

Incident history from the official Anam status page, including resolution updates.

WebRTC sessions are failing to startResolved Sep 23, 2026 · 13 minResolved

Service is fully restored and new WebRTC sessions are succeeding. The cause was a misconfiguration in our traffic-routing layer that was inadvertently rolled out to our production and staging environments at the same time, disrupting request routing. Once we traced it to that change, we reverted it and confirmed recovery across the affected regions. To prevent a recurrence, we're strengthening our infrastructure rollout process so changes must be validated in staging before they can reach production. --- [2026-09-23T14:38:12Z] (monitoring) Fix has rolled out, EU and US sessions appear to be starting without issues again. We'll continue to monitor before sharing a post-mortem. --- [2026-09-23T14:35:48Z] (identified) Sessions in EU and US currently failing to start. A fix is being deployed. --- [2026-09-23T14:27:13Z] (investigating) We're investigating the size of the impact and the RC.

Session failures in the US regionResolved Sep 23, 2026 · 20 minResolved

Service in the US region is restored and new sessions are succeeding. The cause was a misconfiguration of the high-availability mechanism of our US traffic-routing layer, which allowed both of its redundant instances to be taken offline at the same time during an automatic capacity scale-up. We corrected the configuration so the routing layer can no longer be displaced by scale-ups and applied the fix across all production regions. --- [2026-09-23T09:37:38Z] (investigating) We are investigating failures to start new sessions in our US region. Other regions are not affected.

Session start failures in the US regionResolved Aug 28, 2026 · 31 minResolved

Our cloud provider has confirmed the storage outage in the US region is resolved. We restored US-region routing at 19:58 UTC, and session starts in the US have been succeeding with normal connection latency since then. --- [2026-08-28T19:36:18Z] (monitoring) Session starts have been succeeding since 19:05 UTC; customers in the US may notice slightly higher connection latency while the redirect is in place --- [2026-08-28T19:31:18Z] (monitoring) Between 18:29 and 19:05 UTC, session-start requests in the US region returned 503 Service Unavailable with a "No available engines" error. Session token creation was not affected, and sessions in the European region were unaffected throughout. The cause is an ongoing storage outage at our cloud provider in the US region, which our provider has confirmed and is actively working on. To reduce customer impact, we have temporarily redirected US traffic to our European region. Session starts have been succeeding since 19:05 UTC; customers in the US may notice slightly higher connection latency while the redirect is in place. We are monitoring closely and will restore US-region routing once our provider confirms the outage is resolved.

Anam Uptime History

Daily uptime recorded by PulsAPI over the last 90 days, with the days that carried a Anam incident marked. Each day is measured from our own checks, so the record continues even when the vendor publishes nothing.

Uptime history3 days observed
Nov 12100.00% averageNov 14

Live Anam Outage Reports

Problems reported by engineers using Anam. Reports often appear 10 to 20 minutes before the official status page moves, and stay on this page for 90 days.

Reports, last 24 hours0 total
24h agoNothing reportednow

No Anam problems reported yet.

Something wrong with Anam on your end?

Reports are anonymous, take about ten seconds, and help the next engineer who checks.

About Anam

Anam posts its status at status.anam.ai. The page covers 4 components, among them API, Lab and Persona sessions. Past incidents and uptime for Anam stay on this page, which helps when you want to know how often it has trouble.

Anam Status FAQ

Is Anam down right now?

The verdict at the top of this page comes from the latest poll of the official Anam status feed and refreshes automatically, so you are not looking at a stale cached answer. PulsAPI re-checks it every 60 seconds.

What should I do if Anam is not working?

Check the component list on this page first to see if your failure matches a known outage. If it does, you can report the issue for other engineers, follow the incident timeline for vendor updates, and run any fallback your app supports until Anam recovers.

How do I check Anam uptime history?

PulsAPI tracks Anam uptime over 30, 60, and 90-day rolling windows. The current 30-day uptime is not published yet, because a 30-day figure needs 30 days of tracked history. The 90-day uptime strip on this page is public: no account needed. A free account adds alerts whenever Anam changes state, plus 15 days of incident detail; Pro extends that to 90 days and Business to 13 months.

How fast does PulsAPI detect Anam outages?

PulsAPI reads the official Anam status page. PulsAPI re-checks it every 60 seconds. Alerts reach Slack, Discord, Microsoft Teams, PagerDuty, or email once a change has held for 5 minutes, so a one-minute blip does not page you.

Does PulsAPI track individual Anam components?

Yes. PulsAPI monitors 4 individual Anam components, so you can see which service or region is affected instead of a generic "service degraded" banner.

Can I get alerts when Anam goes down?

Yes. Create a free account and subscribe to Anam: the free plan covers three services with unlimited email alerts and no monthly notification cap. Paid plans lift the monitor limit entirely (Pro and above do not meter how many vendors you watch) and route the same alerts into Slack, Discord, Microsoft Teams, PagerDuty and webhooks.

How do I report an issue with Anam to the community?

Click "Report an issue" at the top of this page, pick the issue type and severity, and optionally add your region and a short note. Reports are anonymous and help other engineers spot Anam problems early. Official status pages often lag real incidents by 10 to 20 minutes.

Is there a free way to monitor Anam?

Yes. The free plan covers 3 monitored services with unlimited email alerts, permanently, so Anam plus two more costs nothing. Every new account also opens with a 30-day Business trial (unlimited monitors, Slack alerts, SLA reporting) with no credit card.

Track Anam with the rest of your stack

4372+ vendors in one dashboard, and an email the moment any of them changes state. Three free, and no monitor limit at all from $29/mo, unlike the alternatives, which keep charging by the monitor.

Start free, 3 services