BIMcollab logo

Is BIMcollab Down?

SaaSLive status, outages, and incident history

No. BIMcollab is up right now.

Every monitored BIMcollab system is operational as of November 14, 2026. PulsAPI did not find an outage in its latest check of the official status feed.

OperationalChecked 3m agoLive · every 60s

Know the moment BIMcollab breaks

BIMcollab is healthy right now. We keep checking (every 60 seconds) and email you when that changes.

Free, no password, no card. Unsubscribe in one click.

Official BIMcollab status page
How we know: the official BIMcollab status page, PulsAPI's own check (every 60 seconds), and outage reports from engineers. How PulsAPI monitoring works

Status report

BIMcollab Status Summary

As of 14:21 UTC on 14 November 2026, BIMcollab is operational. PulsAPI checked BIMcollab's official status page and found 4 of 4 components operational, with no active incidents. The latest incident, "BIMcollab partly unavailable", was on Oct 15, 2026 and lasted 22h 18m.

Cite as: PulsAPI, “BIMcollab status”, checked 14 November 2026, 14:21 UTC. https://www.pulsapi.com/services/bimcollab

BIMcollab Component Status

The main BIMcollab systems on this page. All 4 are operational right now.

4operational
BIMcollab Connector
Operational
BIMcollab Document Management
Operational
BIMcollab ID
Operational

1 more components tracked

Their status is in the bar above. Free accounts see every component by name.

Also tracking BIMcollab Issue Management.

See all of them free

Component statuses may change independently during partial outages.

Recent BIMcollab Outages & Incidents

Incident history from the official BIMcollab status page, including resolution updates.

BIMcollab partly unavailableResolved Oct 15, 2026 · 22h 18mResolved

A technical issue that caused the disruption of the BIMcollab platform has been resolved. All services are fully available again, and your data has remained safe throughout. We will continue to monitor the platform closely. We apologize for the inconvenience and thank you for your patience. --- [2026-10-15T19:23:19.055+02:00] (monitoring) The BIMcollab platform is back online. We have identified the issues and put a fix in place. Our team is monitoring the platform closely to make sure the fix holds. If you still experience problems, please contact our support team. --- [2026-10-15T15:25:35.756+02:00] (investigating) To diagnose and resolve the database connection issues, we have temporarily taken the entire BIMcollab platform offline as of 15:18 CEST. This is a controlled step that allows our team to test and restore the connections safely. Your data is safe and not at risk. All BIMcollab services are unavailable during this time. --- [2026-10-15T13:07:17.571+02:00] (investigating) Issue Management is partly affected: some projects may not load. Our team is investigating the issue with the highest priority and will post updates here as soon as we know more. We apologize for the inconvenience. --- [2026-10-15T12:12:10.356+02:00] (investigating) Documents and the WebViewer have been unavailable. We are investigating the issue and will share updates here as soon as possible.

Documents and the WebViewer unavailableResolved Oct 14, 2026 · 1h 48mResolved

Service is fully restored. We experienced unexpected downtime due to DNS resolution issues. --- [2026-10-14T09:45:48.875+02:00] (monitoring) Documents and the WebViewer are available again. We are still looking into the root cause of the outage, and our team is monitoring the services closely to make sure everything stays stable. If you still run into problems, please contact our support team. We apologize for the inconvenience. --- [2026-10-14T08:54:33.124+02:00] (investigating) Documents and the WebViewer are unavailable at the moment. Our team is investigating the cause and working to restore service as soon as possible. We apologize for the inconvenience and will post updates here as soon as we know more.

Upload and download of files slow or unavailableResolved Aug 26, 2026 · 4h 0mResolved

This incident has been resolved. --- [2026-08-26T15:27:01.586+02:00] (investigating) The root cause has been found and a fix has been deployed. We're closely monitoring the systems to see if the issue remains resolved. --- [2026-08-26T13:09:27.682+02:00] (investigating) Our engineers are working on the mitigation of the issue, unfortunately we can not provide timeline of the mitigation yet. --- [2026-08-26T11:27:11.487+02:00] (investigating) Customers can experience issues whilst up- or downloading files to the platform. We're currently investigating the cause.

BIMcollab Uptime History

Daily uptime recorded by PulsAPI over the last 90 days, with the days that carried a BIMcollab incident marked. Each day is measured from our own checks, so the record continues even when the vendor publishes nothing.

Uptime history3 days observed
Nov 12100.00% averageNov 14

Live BIMcollab Outage Reports

Problems reported by engineers using BIMcollab. Reports often appear 10 to 20 minutes before the official status page moves, and stay on this page for 90 days.

Reports, last 24 hours0 total
24h agoNothing reportednow

No BIMcollab problems reported yet.

Something wrong with BIMcollab on your end?

Reports are anonymous, take about ten seconds, and help the next engineer who checks.

About BIMcollab

BIMcollab's status page at status.bimcollab.com lists 4 components, such as BIMcollab Connector, BIMcollab Document Management and BIMcollab ID. We read that page every few minutes and keep the incident history, so you can tell whether a problem is on BIMcollab's side or yours.

BIMcollab Status FAQ

Is BIMcollab down right now?

The verdict at the top of this page comes from the latest poll of the official BIMcollab status feed and refreshes automatically, so you are not looking at a stale cached answer. PulsAPI re-checks it every 60 seconds.

What should I do if BIMcollab is not working?

Check the component list on this page first to see if your failure matches a known outage. If it does, you can report the issue for other engineers, follow the incident timeline for vendor updates, and run any fallback your app supports until BIMcollab recovers.

How do I check BIMcollab uptime history?

PulsAPI tracks BIMcollab uptime over 30, 60, and 90-day rolling windows. The current 30-day uptime is not published yet, because a 30-day figure needs 30 days of tracked history. The 90-day uptime strip on this page is public: no account needed. A free account adds alerts whenever BIMcollab changes state, plus 15 days of incident detail; Pro extends that to 90 days and Business to 13 months.

How fast does PulsAPI detect BIMcollab outages?

PulsAPI reads the official BIMcollab status page. PulsAPI re-checks it every 60 seconds. Alerts reach Slack, Discord, Microsoft Teams, PagerDuty, or email once a change has held for 5 minutes, so a one-minute blip does not page you.

Does PulsAPI track individual BIMcollab components?

Yes. PulsAPI monitors 4 individual BIMcollab components, so you can see which service or region is affected instead of a generic "service degraded" banner.

Can I get alerts when BIMcollab goes down?

Yes. Create a free account and subscribe to BIMcollab: the free plan covers three services with unlimited email alerts and no monthly notification cap. Paid plans lift the monitor limit entirely (Pro and above do not meter how many vendors you watch) and route the same alerts into Slack, Discord, Microsoft Teams, PagerDuty and webhooks.

How do I report an issue with BIMcollab to the community?

Click "Report an issue" at the top of this page, pick the issue type and severity, and optionally add your region and a short note. Reports are anonymous and help other engineers spot BIMcollab problems early. Official status pages often lag real incidents by 10 to 20 minutes.

Is there a free way to monitor BIMcollab?

Yes. The free plan covers 3 monitored services with unlimited email alerts, permanently, so BIMcollab plus two more costs nothing. Every new account also opens with a 30-day Business trial (unlimited monitors, Slack alerts, SLA reporting) with no credit card.

Track BIMcollab with the rest of your stack

4372+ vendors in one dashboard, and an email the moment any of them changes state. Three free, and no monitor limit at all from $29/mo, unlike the alternatives, which keep charging by the monitor.

Start free, 3 services