Geocodio logo

Is Geocodio Down?

OtherLive status, outages, and incident history

No. Geocodio is up right now.

Every monitored Geocodio system is operational as of November 14, 2026. PulsAPI did not find an outage in its latest check of the official status feed.

OperationalChecked 9m agoLive · every 60s

Know the moment Geocodio breaks

Geocodio is healthy right now. We keep checking (every 60 seconds) and email you when that changes.

Free, no password, no card. Unsubscribe in one click.

Official Geocodio status page
How we know: the official Geocodio status page, PulsAPI's own check (every 60 seconds), and outage reports from engineers. How PulsAPI monitoring works

Status report

Geocodio Status Summary

As of 17:34 UTC on 14 November 2026, Geocodio is operational. PulsAPI checked Geocodio's official status page and found 5 of 5 components operational, with no active incidents. The latest incident, "Spreadsheet geocoding jobs are failing", was on Oct 27, 2026 and lasted 2h 39m.

Cite as: PulsAPI, “Geocodio status”, checked 14 November 2026, 17:34 UTC. https://www.pulsapi.com/services/geocodio

Geocodio Component Status

The main Geocodio systems on this page. All 5 are operational right now.

5operational
Geocodio API
Operational
Geocodio Dashboard
Operational
Geocodio Enterprise API
Operational

2 more components tracked

Their status is in the bar above. Free accounts see every component by name.

Also tracking Geocodio Enterprise Dashboard, Website.

See all of them free

Component statuses may change independently during partial outages.

Recent Geocodio Outages & Incidents

Incident history from the official Geocodio status page, including resolution updates.

Spreadsheet geocoding jobs are failingResolved Oct 27, 2026 · 2h 39mResolved

Resolved. All affected spreadsheet jobs have been re-run and completed, and new uploads have been processing normally since the fix went live. If a job of yours still shows as failed, or you have not received a completion email, please contact [support@geocod.io](mailto:support@geocod.io) and we will take care of it. We are sorry for the disruption. --- [2026-10-27T14:48:34Z] (monitoring) The fix is live and new spreadsheet uploads are processing normally again. We are now re-running the jobs that failed earlier today. You will receive your usual completion email when yours is done, and there is no need to upload your spreadsheet again. We will post a final update once all affected jobs have completed. --- [2026-10-27T13:34:10Z] (identified) We have identified the cause and are now deploying a fix across our servers. We will post another update once new spreadsheet uploads are processing normally again, and then re-run the jobs that failed. You do not need to upload your spreadsheet again. --- [2026-10-27T12:45:35Z] (identified) Spreadsheet geocoding jobs uploaded are failing before they finish. Affected jobs show the status "An error occurred" in the dashboard, and jobs created through the Lists API report a failed status. We have found the cause and are deploying a fix. Once the fix is live, we will re-run every affected job, so you do not need to upload your spreadsheet again. We will post an update here when the re-runs are done. Single-address and batch geocoding through the API are not affected, and the rest of the dashboard works as normal. We are sorry for the disruption.

PHP security vulnerabilitiesResolved Oct 21, 2026 · 9h 14mResolved

We have completed patching our Enterprise and Self-Serve infrastructure for CVE-2026-109618 and CVE-2026-109619. We were able to do so without any disruptions to the service. We continue to monitor our infrastructure. We can confirm that between the time we sent the email and the patch being fully deployed, we saw no signs that they were exploited against Geocodio. --- [2026-10-21T09:14:33Z] (monitoring) Geocodio runs on PHP, and PHP has announced two critical security vulnerabilities.  We have seen no sign of exploitation, and all services are running normally. Patches are expected today at 14:00 UTC (10AM US Eastern). We will deploy the patch as soon as it's available.  To protect customer data, there is a chance we may temporarily pause spreadsheet uploads in the dashboard and through the Lists API until the patch is in place. Geocoding API requests will not be affected. We'll update this page if we pause uploads.

Geocodio Uptime History

Daily uptime recorded by PulsAPI over the last 90 days, with the days that carried a Geocodio incident marked. Each day is measured from our own checks, so the record continues even when the vendor publishes nothing.

Uptime history3 days observed
Nov 12100.00% averageNov 14

Live Geocodio Outage Reports

Problems reported by engineers using Geocodio. Reports often appear 10 to 20 minutes before the official status page moves, and stay on this page for 90 days.

Reports, last 24 hours0 total
24h agoNothing reportednow

No Geocodio problems reported yet.

Something wrong with Geocodio on your end?

Reports are anonymous, take about ten seconds, and help the next engineer who checks.

About Geocodio

Is Geocodio down? Its official status page at status.geocod.io reports on 5 components, including Geocodio API, Geocodio Dashboard and Geocodio Enterprise API. PulsAPI checks it every few minutes and can alert you when Geocodio reports an incident.

Geocodio Status FAQ

Is Geocodio down right now?

The verdict at the top of this page comes from the latest poll of the official Geocodio status feed and refreshes automatically, so you are not looking at a stale cached answer. PulsAPI re-checks it every 60 seconds.

What should I do if Geocodio is not working?

Check the component list on this page first to see if your failure matches a known outage. If it does, you can report the issue for other engineers, follow the incident timeline for vendor updates, and run any fallback your app supports until Geocodio recovers.

How do I check Geocodio uptime history?

PulsAPI tracks Geocodio uptime over 30, 60, and 90-day rolling windows. The current 30-day uptime is not published yet, because a 30-day figure needs 30 days of tracked history. The 90-day uptime strip on this page is public: no account needed. A free account adds alerts whenever Geocodio changes state, plus 15 days of incident detail; Pro extends that to 90 days and Business to 13 months.

How fast does PulsAPI detect Geocodio outages?

PulsAPI reads the official Geocodio status page. PulsAPI re-checks it every 60 seconds. Alerts reach Slack, Discord, Microsoft Teams, PagerDuty, or email once a change has held for 5 minutes, so a one-minute blip does not page you.

Does PulsAPI track individual Geocodio components?

Yes. PulsAPI monitors 5 individual Geocodio components, so you can see which service or region is affected instead of a generic "service degraded" banner.

Can I get alerts when Geocodio goes down?

Yes. Create a free account and subscribe to Geocodio: the free plan covers three services with unlimited email alerts and no monthly notification cap. Paid plans lift the monitor limit entirely (Pro and above do not meter how many vendors you watch) and route the same alerts into Slack, Discord, Microsoft Teams, PagerDuty and webhooks.

How do I report an issue with Geocodio to the community?

Click "Report an issue" at the top of this page, pick the issue type and severity, and optionally add your region and a short note. Reports are anonymous and help other engineers spot Geocodio problems early. Official status pages often lag real incidents by 10 to 20 minutes.

Is there a free way to monitor Geocodio?

Yes. The free plan covers 3 monitored services with unlimited email alerts, permanently, so Geocodio plus two more costs nothing. Every new account also opens with a 30-day Business trial (unlimited monitors, Slack alerts, SLA reporting) with no credit card.

Track Geocodio with the rest of your stack

4372+ vendors in one dashboard, and an email the moment any of them changes state. Three free, and no monitor limit at all from $29/mo, unlike the alternatives, which keep charging by the monitor.

Start free, 3 services