Is NetBird Down?

SaaSLive status, outages, and incident history

No. NetBird is up right now.

Every monitored NetBird system is operational as of August 11, 2026. PulsAPI did not find an outage in its latest check of the official status feed.

OperationalChecked 33m agoLive, rechecked every 60s

Start monitoring NetBird Official NetBird status page

How we know: the official NetBird status page, PulsAPI's own check every 60 seconds, and outage reports from engineers. How PulsAPI monitoring works

NetBird Component Status

The main NetBird systems on this page. All 8 are operational right now.

8operational

Dashboard Service

Operational

Documentation site

Operational

Management Service

Operational

5 more components tracked

Their status is in the bar above. Free accounts see every component by name.

Also tracking Packages Service, Relay Service, Signal Service, User authentication Service, Website.

Create a free account

Component statuses may change independently during partial outages.

Recent NetBird Outages & Incidents

Incident history from the official NetBird status page, including resolution updates.

Uptime history4 days observed

Aug 8100.00% averageAug 11

Dashboard unavailableResolved Aug 7, 2026 · 3 minResolved

The issue affecting our dashboard service has been fully resolved. All systems are now operating normally, and we will continue to monitor to ensure stability. --- [2026-08-07T13:30:05Z] (investigating) We are currently investigating reports of an issue affecting dashboard service authentication. Our team is working to determine the root cause and will provide an update as soon as more information is available. Users with active sessions are not affected by the issue.

Management service instabilityResolved Jun 1, 2026 · 3h 11mResolved

**Status Update** The issue affecting the Management Service has been fully resolved. All systems are operating normally, and we will continue to monitor the environment to ensure ongoing stability. **Incident Summary** A load balancer configuration change caused widespread peer reconnections across all clusters. The configuration inadvertently imposed a connection limit per load balancer node, reducing available capacity to less than 5% and preventing nodes from accepting new connections reliably. As an immediate mitigation, we rolled back the configuration, which restored normal service operation. After identifying the root cause and validating revised configuration parameters in a controlled manner, we re-applied the configuration with the necessary adjustments. The issue has been successfully resolved, and the system is now functioning as expected. --- [2026-06-01T11:07:48Z] (monitoring) A permanent fix has been implemented for the issue affecting the management service, and we are monitoring the results to ensure everything is operating as expected. A new update will come in 30 minutes with more details of the issue. --- [2026-06-01T10:49:19Z] (identified) We still working on a permanent fix for the management issue. The system still operational. Updates will be shared as progress is made. --- [2026-06-01T09:42:11Z] (identified) We have identified the cause of the issue affecting the management service and implemented a temporary fix. The system is operational now and will continue working on the permanent fix. Updates will be shared as progress is made. --- [2026-06-01T09:26:04Z] (investigating) We are currently investigating reports of an issue affecting the management service. Our team is working to determine the root cause and will provide an update as soon as more information is available.

Wrong Peer Connection StatusResolved May 19, 2026 · 24 minResolved

The issue affecting the peers status on management has been fully resolved. All systems are now operating normally, and we will continue to monitor to ensure stability. --- [2026-05-19T17:11:51Z] (monitoring) A fix has been implemented for the issue affecting the peer status on management, and we are monitoring the results to ensure everything is operating as expected. --- [2026-05-19T17:04:25Z] (investigating) We are experiencing an issue with the peer connection status. Peers that are connected to management are being shown as disconnected on the dashboard. The peers are still receiving updates and should operate as expected and only show wrong status on the dashboard. We are investigating the issue and keep you updated.

Live NetBird Outage Reports

Problems reported by engineers using NetBird. Reports often appear 10 to 20 minutes before the official status page moves, and stay on this page for 90 days.

Reports, last 24 hours0 total

24h agoNothing reportednow

No NetBird problems reported yet.

Something wrong with NetBird on your end?

Reports are anonymous, take about ten seconds, and help the next engineer who checks.

About NetBird

NetBird publishes a public status page at status.netbird.io covering 8 components, including Documentation site, Dashboard Service and Website. PulsAPI tracks NetBird outages, degraded performance and incident history in real time, alongside the rest of your SaaS stack.

Over the past 30 days, PulsAPI has measured NetBird uptime at 100.00%. Response times, incident history, and SLA tracking for NetBird are available on the PulsAPI dashboard.

NetBird Status FAQ

Is NetBird down right now?

PulsAPI checks NetBird every 60 seconds. The verdict at the top of this page comes from the latest poll of the official NetBird status feed and refreshes automatically, so you are not looking at a stale cached answer.

What should I do if NetBird is not working?

Check the component list on this page first to see if your failure matches a known outage. If it does, you can report the issue for other engineers, follow the incident timeline for vendor updates, and run any fallback your app supports until NetBird recovers.

How do I check NetBird uptime history?

PulsAPI tracks NetBird uptime over 30, 60, and 90-day rolling windows. The current 30-day uptime is 100.00%. A free PulsAPI account unlocks the full 90-day SLA history and incident timeline for NetBird.

How fast does PulsAPI detect NetBird outages?

PulsAPI polls the official NetBird status page every 60 seconds and usually delivers alerts to Slack, Discord, Microsoft Teams, PagerDuty, or email in under 4 seconds after detection. That is often faster than someone on your team notices on their own.

Does PulsAPI track individual NetBird components?

Yes. PulsAPI monitors 8 individual NetBird components, so you can see which service or region is affected instead of a generic "service degraded" banner.

Can I get alerts when NetBird goes down?

Yes. Create a PulsAPI account and subscribe to NetBird. Email alerts are included on the free Starter plan. Paid plans add Slack, Discord, Microsoft Teams, PagerDuty, and webhooks whenever NetBird status changes.

How do I report an issue with NetBird to the community?

Click "Report an issue" at the top of this page, pick the issue type and severity, and optionally add your region and a short note. Reports are anonymous and help other engineers spot NetBird problems early. Official status pages often lag real incidents by 10 to 20 minutes.

Is there a free way to monitor NetBird?

Yes. PulsAPI's Starter plan includes up to 10 monitored services with email alerts, and the 30-day free trial requires no credit card. You can monitor NetBird alongside up to 9 other services at pulsapi.com/signup.

Track NetBird with the rest of your stack

Monitor 2461+ cloud services from one dashboard and get alerts when NetBird status changes.

Start free trial