D-ID logo

Is D-ID Down?

SaaSLive status, outages, and incident history

No. D-ID is up right now.

Every monitored D-ID system is operational as of September 25, 2026. PulsAPI did not find an outage in its latest check of the official status feed.

OperationalChecked 4m agoLive · 60s while moving

Know the moment D-ID breaks

D-ID is healthy right now. We keep checking (every 60 seconds once it starts moving) and email you the moment that changes.

Free, no password, no card. Unsubscribe in one click.

Official D-ID status page
How we know: the official D-ID status page, PulsAPI's own check (every 60 seconds while one is moving, every 5 to 20 minutes while it is stable), and outage reports from engineers. How PulsAPI monitoring works

D-ID Component Status

The main D-ID systems on this page. All 5 are operational right now.

5operational
Agents API
Operational
Avatars API
Operational
Studio Webapp
Operational

2 more components tracked

Their status is in the bar above. Free accounts see every component by name.

Also tracking Translations API, Videos API.

See all of them free

Component statuses may change independently during partial outages.

Recent D-ID Outages & Incidents

Incident history from the official D-ID status page, including resolution updates.

V3 (Clips) Agents Stream Creation ErrorsResolved Aug 31, 2026 · -860 minResolved

V3 (Clips) streaming is fully restored and operating normally. --- [2026-08-31T08:46:58Z] (investigating) Error rates are decreasing, we are monitoring recovery. --- [2026-08-31T09:02:15Z] (investigating) We are investigating elevated error rates when creating V3 (Clips) streaming sessions, some session creations may fail or time out.

V2 (Talks) Agents Streaming OutageResolved Aug 31, 2026 · -783 minResolved

V2 (Talks) streaming is fully restored and operating normally. --- [2026-08-31T09:01:15Z] (investigating) V2 (Talks) stream creation is recovering and new sessions are being created successfully, some requests may still fail intermittently while we monitor. --- [2026-08-31T08:38:18Z] (investigating) We are currently investigating reports of an issue affecting stream session creation for V2 (Talks) agents. Our team is working to identify the root cause. We will provide an update as soon as more information is available.

Streaming outage in several avatar typesResolved Aug 11, 2026 · 10 minResolved

The issue affecting Streaming connection failures on several avatar types. has been resolved. Systems are operating normally. We appreciate your patience and apologize for any inconvenience caused. --- [2026-08-11T20:16:40Z] (monitoring) A fix has been implemented and we are currently monitoring the results to ensure full recovery. We will confirm once the issue is fully resolved. --- [2026-08-11T20:16:28Z] (identified) We have identified the root cause of the issue affecting several avatar types - streaming connection failures. A fix is being implemented. We will continue to provide updates as we make progress. --- [2026-08-11T20:09:04Z] (investigating) We are currently investigating reports of an issue affecting Talks and Clips Streaming for Agents connection failures. Our team is working to identify the root cause. We will provide an update as soon as more information is available.

D-ID Uptime History

Daily uptime recorded by PulsAPI over the last 90 days, with the days that carried a D-ID incident marked. Each day is measured from our own checks, so the record continues even when the vendor publishes nothing.

Uptime history49 days observed
Aug 8100.00% averageSep 25

Live D-ID Outage Reports

Problems reported by engineers using D-ID. Reports often appear 10 to 20 minutes before the official status page moves, and stay on this page for 90 days.

Reports, last 24 hours0 total
24h agoNothing reportednow

No D-ID problems reported yet.

Something wrong with D-ID on your end?

Reports are anonymous, take about ten seconds, and help the next engineer who checks.

About D-ID

D-ID exposes 5 monitored components on its status page at status.d-id.com — Avatars API, Translations API and Studio Webapp among them. Follow D-ID downtime, degraded performance and resolved incidents here, with uptime history alongside your other SaaS services.

Over the past 30 days, PulsAPI has measured D-ID uptime at 100.00%. Response times, incident history, and SLA tracking for D-ID are available on the PulsAPI dashboard.

D-ID Status FAQ

Is D-ID down right now?

The verdict at the top of this page comes from the latest poll of the official D-ID status feed and refreshes automatically, so you are not looking at a stale cached answer. PulsAPI re-checks a vendor every 60 seconds whenever it is not fully operational, or has changed status in the last 30 minutes, so an incident is always on the fastest cadence. Vendors that are stable and rarely watched are re-checked every 5 to 20 minutes instead.

What should I do if D-ID is not working?

Check the component list on this page first to see if your failure matches a known outage. If it does, you can report the issue for other engineers, follow the incident timeline for vendor updates, and run any fallback your app supports until D-ID recovers.

How do I check D-ID uptime history?

PulsAPI tracks D-ID uptime over 30, 60, and 90-day rolling windows. The current 30-day uptime is 100.00%. The 90-day uptime strip on this page is public: no account needed. A free account adds alerts whenever D-ID changes state, plus 15 days of incident detail; Pro extends that to 90 days and Business to 13 months.

How fast does PulsAPI detect D-ID outages?

PulsAPI reads the official D-ID status page. PulsAPI re-checks a vendor every 60 seconds whenever it is not fully operational, or has changed status in the last 30 minutes, so an incident is always on the fastest cadence. Vendors that are stable and rarely watched are re-checked every 5 to 20 minutes instead. Alerts reach Slack, Discord, Microsoft Teams, PagerDuty, or email within seconds of detection.

Does PulsAPI track individual D-ID components?

Yes. PulsAPI monitors 5 individual D-ID components, so you can see which service or region is affected instead of a generic "service degraded" banner.

Can I get alerts when D-ID goes down?

Yes. Create a free account and subscribe to D-ID: the free plan covers three services with unlimited email alerts and no monthly notification cap. Paid plans lift the monitor limit entirely (Pro and above do not meter how many vendors you watch) and route the same alerts into Slack, Discord, Microsoft Teams, PagerDuty and webhooks.

How do I report an issue with D-ID to the community?

Click "Report an issue" at the top of this page, pick the issue type and severity, and optionally add your region and a short note. Reports are anonymous and help other engineers spot D-ID problems early. Official status pages often lag real incidents by 10 to 20 minutes.

Is there a free way to monitor D-ID?

Yes. The free plan covers 3 monitored services with unlimited email alerts, permanently, so D-ID plus two more costs nothing. Every new account also opens with a 30-day Business trial (unlimited monitors, Slack alerts, SLA reporting) with no credit card.

Track D-ID with the rest of your stack

2463+ vendors in one dashboard, and an email the moment any of them changes state. Three free, and no monitor limit at all from $29/mo, unlike the alternatives, which keep charging by the monitor.

Start free, 3 services