ExamSoft logo

Is ExamSoft Down?

SaaSLive status, outages, and incident history

No. ExamSoft is up right now.

Every monitored ExamSoft system is operational as of November 9, 2026. PulsAPI did not find an outage in its latest check of the official status feed.

OperationalChecked 4m agoLive · every 60s

Know the moment ExamSoft breaks

ExamSoft is healthy right now. We keep checking (every 60 seconds) and email you when that changes.

Free, no password, no card. Unsubscribe in one click.

Official ExamSoft status page
How we know: the official ExamSoft status page, PulsAPI's own check (every 60 seconds), and outage reports from engineers. How PulsAPI monitoring works

Status report

ExamSoft Status Summary

As of 03:38 UTC on 9 November 2026, ExamSoft is operational. PulsAPI checked ExamSoft's official status page and found 9 of 9 components operational, with no active incidents. Over the last 30 days PulsAPI measured 100.00% uptime for ExamSoft, counting degraded performance as up. The latest incident, "Emergency Maintenance: LiftUp Application", was on Oct 21, 2026 and lasted 6h 10m.

Cite as: PulsAPI, “ExamSoft status”, checked 9 November 2026, 03:38 UTC. https://www.pulsapi.com/services/examsoft

ExamSoft Component Status

The main ExamSoft systems on this page. All 9 are operational right now.

9operational
Enterprise Portal
Operational
Enterprise Portal (New Portal) Reporting
Operational
Exam Now
Operational

6 more components tracked

Their status is in the bar above. Free accounts see every component by name.

Also tracking Examplify for iPad Services, Examplify Services, Legacy Portal, Legacy Portal Reporting, Liftupp, Support.

See all of them free

Component statuses may change independently during partial outages.

Recent ExamSoft Outages & Incidents

Incident history from the official ExamSoft status page, including resolution updates.

Emergency Maintenance: LiftUp ApplicationResolved Oct 21, 2026 · 6h 10mResolved

This incident has been resolved. --- [2026-10-21T10:17:21.573-05:00] (investigating) The LiftUp application is temporarily offline for emergency maintenance and is expected to be restored later this evening. Important Notice: iPad session syncing is paused while maintenance is underway. All unsynced data remains safe on your device. Do NOT uninstall or delete the LiftUp app, as doing so will permanently delete your unsynced data. Keep the app installed, and normal syncing will resume automatically once the site is restored. For all updates, please subscribe to the status.examsoft.com website.

Legacy Reporting Delays or UnavailabilityResolved Oct 15, 2026 · 3h 13mResolved

Reporting functionality is operating normally. Thank you for your patience while we worked to resolve this issue. --- [2026-10-15T11:37:46.952-05:00] (monitoring) The issue affecting Legacy Reporting has been identified, and service has been restored. We are actively monitoring the service to ensure continued stability. We will provide further updates if necessary. --- [2026-10-15T09:08:59.567-05:00] (investigating) The Legacy portal is currently experiencing a service incident affecting Reporting. During this time, users may experience delays when accessing reports or find that reporting services are temporarily unavailable. We are actively investigating and working to restore normal service. Updates will be provided on the ExamSoft Status Page as more information becomes available.

Enterprise portal degraded performanceResolved Sep 15, 2026 · 3h 0mResolved

The issue affecting the Enterprise Portal has been resolved. --- [2026-09-15T15:03:43.645-05:00] (monitoring) Enterprise users should now see improved response times and normal site speed. We are currently monitoring to verify that no additional issues arise. --- [2026-09-15T14:01:43.304-05:00] (investigating) We are investigating reports of degraded performance affecting the Enterprise Portal. Some users may experience errors or intermittent slowness when accessing certain portal functionality We will share updates here so you can track our progress while we resolve the issue.

Upcoming maintenance

Announced by ExamSoft. Planned work, not an outage.

ExamSoft Legacy platform maintenanceScheduled for Nov 21, 2026 · 4h 0mScheduled

ExamSoft will perform scheduled maintenance on the ExamSoft Legacy platform beginning at 8:00 p.m. CT on Friday, November 20, 2026. During the maintenance window, the Legacy Portal will be unavailable, and you will be unable to: -Access the Exam Maker portal -Access the Exam Taker portal -Log in to Examplify The maintenance window is expected to last approximately four hours, ending at 12:00 a.m. CT on Saturday, November 21, 2026. Once maintenance is complete, all services will be fully restored. Thank you for your patience and cooperation as we perform these necessary updates.

ExamSoft Uptime History

Daily uptime recorded by PulsAPI over the last 90 days, with the days that carried a ExamSoft incident marked. Each day is measured from our own checks, so the record continues even when the vendor publishes nothing.

Uptime history1 day observed
Nov 9100.00% averageNov 9

Live ExamSoft Outage Reports

Problems reported by engineers using ExamSoft. Reports often appear 10 to 20 minutes before the official status page moves, and stay on this page for 90 days.

Reports, last 24 hours0 total
24h agoNothing reportednow

No ExamSoft problems reported yet.

Something wrong with ExamSoft on your end?

Reports are anonymous, take about ten seconds, and help the next engineer who checks.

About ExamSoft

Is ExamSoft down? Its official status page at status.examsoft.com reports on 9 components, including Legacy Portal (examsoft.com/institutionid), Legacy Portal Reporting and Enterprise Portal (ui.examsoft.io). PulsAPI checks it every few minutes and can alert you when ExamSoft reports an incident.

Over the past 30 days, PulsAPI has measured ExamSoft uptime at 100.00%. Response times, incident history, and SLA tracking for ExamSoft are available on the PulsAPI dashboard.

ExamSoft Status FAQ

Is ExamSoft down right now?

The verdict at the top of this page comes from the latest poll of the official ExamSoft status feed and refreshes automatically, so you are not looking at a stale cached answer. PulsAPI re-checks it every 60 seconds.

What should I do if ExamSoft is not working?

Check the component list on this page first to see if your failure matches a known outage. If it does, you can report the issue for other engineers, follow the incident timeline for vendor updates, and run any fallback your app supports until ExamSoft recovers.

How do I check ExamSoft uptime history?

PulsAPI tracks ExamSoft uptime over 30, 60, and 90-day rolling windows. The current 30-day uptime is 100.00%. The 90-day uptime strip on this page is public: no account needed. A free account adds alerts whenever ExamSoft changes state, plus 15 days of incident detail; Pro extends that to 90 days and Business to 13 months.

How fast does PulsAPI detect ExamSoft outages?

PulsAPI reads the official ExamSoft status page. PulsAPI re-checks it every 60 seconds. Alerts reach Slack, Discord, Microsoft Teams, PagerDuty, or email once a change has held for 5 minutes, so a one-minute blip does not page you.

Does PulsAPI track individual ExamSoft components?

Yes. PulsAPI monitors 9 individual ExamSoft components, so you can see which service or region is affected instead of a generic "service degraded" banner.

Can I get alerts when ExamSoft goes down?

Yes. Create a free account and subscribe to ExamSoft: the free plan covers three services with unlimited email alerts and no monthly notification cap. Paid plans lift the monitor limit entirely (Pro and above do not meter how many vendors you watch) and route the same alerts into Slack, Discord, Microsoft Teams, PagerDuty and webhooks.

How do I report an issue with ExamSoft to the community?

Click "Report an issue" at the top of this page, pick the issue type and severity, and optionally add your region and a short note. Reports are anonymous and help other engineers spot ExamSoft problems early. Official status pages often lag real incidents by 10 to 20 minutes.

Is there a free way to monitor ExamSoft?

Yes. The free plan covers 3 monitored services with unlimited email alerts, permanently, so ExamSoft plus two more costs nothing. Every new account also opens with a 30-day Business trial (unlimited monitors, Slack alerts, SLA reporting) with no credit card.

Track ExamSoft with the rest of your stack

2660+ vendors in one dashboard, and an email the moment any of them changes state. Three free, and no monitor limit at all from $29/mo, unlike the alternatives, which keep charging by the monitor.

Start free, 3 services