movingimage logo

Is movingimage Down?

MediaLive status, outages, and incident history

No. movingimage is up right now.

Every monitored movingimage system is operational as of November 14, 2026. PulsAPI did not find an outage in its latest check of the official status feed.

OperationalChecked 7m agoLive · every 60s

Know the moment movingimage breaks

movingimage is healthy right now. We keep checking (every 60 seconds) and email you when that changes.

Free, no password, no card. Unsubscribe in one click.

Official movingimage status page
How we know: the official movingimage status page, PulsAPI's own check (every 60 seconds), and outage reports from engineers. How PulsAPI monitoring works

Status report

movingimage Status Summary

As of 15:53 UTC on 14 November 2026, movingimage is operational. PulsAPI checked movingimage's official status page and found 7 of 7 components operational, with no active incidents. The latest incident, "VMPRO – Upload & Video Management Failure", was on Oct 8, 2026 and lasted 1h 0m.

Cite as: PulsAPI, “movingimage status”, checked 14 November 2026, 15:53 UTC. https://www.pulsapi.com/services/movingimage

movingimage Component Status

The main movingimage systems on this page. All 7 are operational right now.

7operational
Applications » Analytics
Operational
Applications » CorporateTube
Operational
Applications » LSPro
Operational

4 more components tracked

Their status is in the bar above. Free accounts see every component by name.

Also tracking Applications » VideoManager Pro, Applications » Virtual Events, Applications » Webcast, Platform Services » Authentication and SSO.

See all of them free

Component statuses may change independently during partial outages.

Recent movingimage Outages & Incidents

Incident history from the official movingimage status page, including resolution updates.

VMPRO – Upload & Video Management FailureResolved Oct 8, 2026 · 1h 0mResolved

Dear movingimage Users, We are pleased to inform you that the identified issue is now resolved. The disruption occurred during an update to our network routing infrastructure, when a configuration error caused connectivity problems and temporary service unavailability. To restore service, we reverted to our previous routing setup, and all affected services are now fully available again. The restored services are listed below. We apologize for any inconvenience this may have caused. Thank you for your understanding. If you have any questions, feel free to get in contact with us. Your movingimage Team --- [2026-10-08T12:11:55.719+02:00] (monitoring) Dear movingimage Users, We are pleased to inform you that the identified issue is now mitigated. The affected services listed below are being monitored. Thank you for your understanding. If you have any questions, feel free to get in contact with us. Your movingimage Team --- [2026-10-08T12:00:31.468+02:00] (identified) Dear movingimage Users, We have identified the cause of this issue and are working to resolve it as soon as possible. The affected services are listed below this email, and on our status page. When we have further information or a resolution on this issue, we will post an update on the status page. Thank you for your understanding. If you have any questions, feel free to get in contact with us. Your movingimage Team

VideoManager Pro – New Player: Playout not workingResolved Sep 7, 2026 · 3h 8mResolved

Dear movingimage Users, We are pleased to inform you that the identified issue is now resolved. The restored services are listed below. Thank you for your understanding. If you have any questions, feel free to get in contact with us. Your movingimage Team --- [2026-09-07T11:10:44.093+02:00] (monitoring) A fix has been implemented and we are monitoring the results. --- [2026-09-07T10:52:27.210+02:00] (identified) Dear movingimage Users, We are investigating an issue that is affecting the movingimage platform. The affected services are listed below this email, and on our status page. When we have further information or a resolution on this issue, we will post an update on the status page. Thank you for your understanding. If you have any questions, feel free to get in contact with us. Your movingimage Team

Partial outage authentication serviceResolved Aug 20, 2026 · 0 minResolved

Dear movingimage Users, We are pleased to inform you that we identified and resolved an earlier issue that affected the movingimage platform. On 20 August 2026, between 10:02 and 10:18 CEST, some users experienced problems signing in to the platform. The cause was a rate limit within one of the components that temporarily restricted authentication requests. The issue has been dealt with, and all services have been fully operational since 10:18 CEST. The restored services are listed below. Thank you for your understanding. If you have any questions, feel free to get in contact with us. Your movingimage Team

movingimage Uptime History

Daily uptime recorded by PulsAPI over the last 90 days, with the days that carried a movingimage incident marked. Each day is measured from our own checks, so the record continues even when the vendor publishes nothing.

Uptime history3 days observed
Nov 12100.00% averageNov 14

Live movingimage Outage Reports

Problems reported by engineers using movingimage. Reports often appear 10 to 20 minutes before the official status page moves, and stay on this page for 90 days.

Reports, last 24 hours0 total
24h agoNothing reportednow

No movingimage problems reported yet.

Something wrong with movingimage on your end?

Reports are anonymous, take about ten seconds, and help the next engineer who checks.

About movingimage

Is movingimage down? Its official status page at status.movingimage.com reports on 7 components, including Analytics, CorporateTube and LSPro. PulsAPI checks it every few minutes and can alert you when movingimage reports an incident.

movingimage Status FAQ

Is movingimage down right now?

The verdict at the top of this page comes from the latest poll of the official movingimage status feed and refreshes automatically, so you are not looking at a stale cached answer. PulsAPI re-checks it every 60 seconds.

What should I do if movingimage is not working?

Check the component list on this page first to see if your failure matches a known outage. If it does, you can report the issue for other engineers, follow the incident timeline for vendor updates, and run any fallback your app supports until movingimage recovers.

How do I check movingimage uptime history?

PulsAPI tracks movingimage uptime over 30, 60, and 90-day rolling windows. The current 30-day uptime is not published yet, because a 30-day figure needs 30 days of tracked history. The 90-day uptime strip on this page is public: no account needed. A free account adds alerts whenever movingimage changes state, plus 15 days of incident detail; Pro extends that to 90 days and Business to 13 months.

How fast does PulsAPI detect movingimage outages?

PulsAPI reads the official movingimage status page. PulsAPI re-checks it every 60 seconds. Alerts reach Slack, Discord, Microsoft Teams, PagerDuty, or email once a change has held for 5 minutes, so a one-minute blip does not page you.

Does PulsAPI track individual movingimage components?

Yes. PulsAPI monitors 7 individual movingimage components, so you can see which service or region is affected instead of a generic "service degraded" banner.

Can I get alerts when movingimage goes down?

Yes. Create a free account and subscribe to movingimage: the free plan covers three services with unlimited email alerts and no monthly notification cap. Paid plans lift the monitor limit entirely (Pro and above do not meter how many vendors you watch) and route the same alerts into Slack, Discord, Microsoft Teams, PagerDuty and webhooks.

How do I report an issue with movingimage to the community?

Click "Report an issue" at the top of this page, pick the issue type and severity, and optionally add your region and a short note. Reports are anonymous and help other engineers spot movingimage problems early. Official status pages often lag real incidents by 10 to 20 minutes.

Is there a free way to monitor movingimage?

Yes. The free plan covers 3 monitored services with unlimited email alerts, permanently, so movingimage plus two more costs nothing. Every new account also opens with a 30-day Business trial (unlimited monitors, Slack alerts, SLA reporting) with no credit card.

Track movingimage with the rest of your stack

4372+ vendors in one dashboard, and an email the moment any of them changes state. Three free, and no monitor limit at all from $29/mo, unlike the alternatives, which keep charging by the monitor.

Start free, 3 services