TAL.DE logo

Is TAL.DE Down?

Cloud InfrastructureLive status, outages, and incident history

No. TAL.DE is up right now.

Every monitored TAL.DE system is operational as of November 14, 2026. PulsAPI did not find an outage in its latest check of the official status feed.

OperationalChecked 2m agoLive · every 60s

Know the moment TAL.DE breaks

TAL.DE is healthy right now. We keep checking (every 60 seconds) and email you when that changes.

Free, no password, no card. Unsubscribe in one click.

Official TAL.DE status page
How we know: the official TAL.DE status page, PulsAPI's own check (every 60 seconds), and outage reports from engineers. How PulsAPI monitoring works

Status report

TAL.DE Status Summary

As of 14:34 UTC on 14 November 2026, TAL.DE is operational. PulsAPI checked TAL.DE's official status page and found 7 of 7 components operational, with no active incidents. The latest incident, "Wichtige Mitteilung: Mögliche Beeinträchtigungen unserer Fiber Access Dienste", was on Nov 12, 2026 and lasted 3h 23m.

Cite as: PulsAPI, “TAL.DE status”, checked 14 November 2026, 14:34 UTC. https://www.pulsapi.com/services/tal-de

TAL.DE Component Status

The main TAL.DE systems on this page. All 7 are operational right now.

7operational
Datacenter Services
Operational
DSL Access
Operational
Evocount Services » EvoCount Core Services
Operational

4 more components tracked

Their status is in the bar above. Free accounts see every component by name.

Also tracking Evocount Services » EvoEyes Portal, Fiber Access, Telefonie & Mail, vServer & Hosting.

See all of them free

Component statuses may change independently during partial outages.

Recent TAL.DE Outages & Incidents

Incident history from the official TAL.DE status page, including resolution updates.

Wichtige Mitteilung: Mögliche Beeinträchtigungen unserer Fiber Access DiensteResolved Nov 12, 2026 · 3h 23mResolved

This incident has been resolved. --- [2026-11-12T17:41:10.291+01:00] (monitoring) A fix has been implemented and we are monitoring the results. --- [2026-11-12T16:32:43.293+01:00] (identified) Aktuell liegt eine Störung unseres Glasfasernetzes im Raum Wuppertal-Barmen vor, wodurch Fiber Access Services beeinträchtigt sind. Nach derzeitigem Kenntnisstand deutet die Ursache auf eine Beschädigung des Glasfaserweges hin. Wir stehen bereits in engem Austausch mit den beteiligten Netzbetreibern und arbeiten mit Hochdruck an der Entstörung und schnellstmöglichen Wiederherstellung der Services. --- [2026-11-12T14:55:31.151+01:00] (investigating) Wir haben derzeit einen Vorfall, der möglicherweise zu Beeinträchtigungen unserer Dienste im Raum Wuppertal Barmen führen kann. Unser Team arbeitet bereits an der Lösung um das Problem schnellstmöglich zu beheben. Vielen Dank für Ihre Geduld und Ihr Verständnis.

PHP – Aktuelle ProblemeResolved Oct 22, 2026 · 24h 22mResolved

This incident has been resolved. --- [2026-10-22T10:39:55.925+02:00] (investigating) Am 21. Oktober 2026 wurden zwei kritische Sicherheitslücken in der weitverbreiteten Programmiersprache PHP bekannt gegeben (CVE-2026-109618 und CVE-2026-109619). Diese Schwachstellen können es Angreifern unter bestimmten Voraussetzungen ermöglichen, Schadcode auf betroffenen Webservern auszuführen, ohne sich zuvor anmelden zu müssen. Aufgrund eines aktuellen Problems bei PHP arbeiten wir daran, die neuesten korrigierten PHP-Versionen schnellstmöglich bereitzustellen. Sobald diese verfügbar sind, informieren wir Sie an dieser Stelle. Wichtiger Hinweis für vServer-Kunden: Kunden mit einem vServer sind selbst für die Wartung, Sicherheit und Aktualisierung der auf ihrem Server installierten Software verantwortlich. Wir empfehlen daher dringend, die eingesetzte PHP-Version zu überprüfen und schnellstmöglich auf eine entsprechend korrigierte Version zu aktualisieren, sobald diese verfügbar ist. Weitere Informationen finden Sie hier: https://www.bsi.bund.de/DE/Themen/Unternehmen-und-Organisationen/Cyber-Sicherheitslage/Technische-Sicherheitshinweise-und-Warnungen/Cyber-Sicherheitswarnungen/cyber-sicherheitswarnungen_node.html

Mögliche Beeinträchtigung des InternetzugangsResolved Oct 20, 2026 · 16 minResolved

This incident has been resolved. --- [2026-10-20T10:07:13.079+02:00] (investigating) We are continuing to investigate this issue. --- [2026-10-20T09:51:51.454+02:00] (investigating) We are currently investigating this issue.

TAL.DE Uptime History

Daily uptime recorded by PulsAPI over the last 90 days, with the days that carried a TAL.DE incident marked. Each day is measured from our own checks, so the record continues even when the vendor publishes nothing.

Uptime history3 days observed
Nov 12100.00% averageNov 14

Live TAL.DE Outage Reports

Problems reported by engineers using TAL.DE. Reports often appear 10 to 20 minutes before the official status page moves, and stay on this page for 90 days.

Reports, last 24 hours0 total
24h agoNothing reportednow

No TAL.DE problems reported yet.

Something wrong with TAL.DE on your end?

Reports are anonymous, take about ten seconds, and help the next engineer who checks.

About TAL.DE

TAL.DE's status page at talde.statuspage.io lists 7 components, such as DSL Access, Datacenter Services and EvoCount Core Services. We read that page every few minutes and keep the incident history, so you can tell whether a problem is on TAL.DE's side or yours.

TAL.DE Status FAQ

Is TAL.DE down right now?

The verdict at the top of this page comes from the latest poll of the official TAL.DE status feed and refreshes automatically, so you are not looking at a stale cached answer. PulsAPI re-checks it every 60 seconds.

What should I do if TAL.DE is not working?

Check the component list on this page first to see if your failure matches a known outage. If it does, you can report the issue for other engineers, follow the incident timeline for vendor updates, and run any fallback your app supports until TAL.DE recovers.

How do I check TAL.DE uptime history?

PulsAPI tracks TAL.DE uptime over 30, 60, and 90-day rolling windows. The current 30-day uptime is not published yet, because a 30-day figure needs 30 days of tracked history. The 90-day uptime strip on this page is public: no account needed. A free account adds alerts whenever TAL.DE changes state, plus 15 days of incident detail; Pro extends that to 90 days and Business to 13 months.

How fast does PulsAPI detect TAL.DE outages?

PulsAPI reads the official TAL.DE status page. PulsAPI re-checks it every 60 seconds. Alerts reach Slack, Discord, Microsoft Teams, PagerDuty, or email once a change has held for 5 minutes, so a one-minute blip does not page you.

Does PulsAPI track individual TAL.DE components?

Yes. PulsAPI monitors 7 individual TAL.DE components, so you can see which service or region is affected instead of a generic "service degraded" banner.

Can I get alerts when TAL.DE goes down?

Yes. Create a free account and subscribe to TAL.DE: the free plan covers three services with unlimited email alerts and no monthly notification cap. Paid plans lift the monitor limit entirely (Pro and above do not meter how many vendors you watch) and route the same alerts into Slack, Discord, Microsoft Teams, PagerDuty and webhooks.

How do I report an issue with TAL.DE to the community?

Click "Report an issue" at the top of this page, pick the issue type and severity, and optionally add your region and a short note. Reports are anonymous and help other engineers spot TAL.DE problems early. Official status pages often lag real incidents by 10 to 20 minutes.

Is there a free way to monitor TAL.DE?

Yes. The free plan covers 3 monitored services with unlimited email alerts, permanently, so TAL.DE plus two more costs nothing. Every new account also opens with a 30-day Business trial (unlimited monitors, Slack alerts, SLA reporting) with no credit card.

Track TAL.DE with the rest of your stack

4372+ vendors in one dashboard, and an email the moment any of them changes state. Three free, and no monitor limit at all from $29/mo, unlike the alternatives, which keep charging by the monitor.

Start free, 3 services