BuildingLink logo

Is BuildingLink Down?

SaaSLive status, outages, and incident history

No. BuildingLink is up right now.

Every monitored BuildingLink system is operational as of November 9, 2026. PulsAPI did not find an outage in its latest check of the official status feed.

OperationalChecked just nowLive · every 60s

Know the moment BuildingLink breaks

BuildingLink is healthy right now. We keep checking (every 60 seconds) and email you when that changes.

Free, no password, no card. Unsubscribe in one click.

Official BuildingLink status page
How we know: the official BuildingLink status page, PulsAPI's own check (every 60 seconds), and outage reports from engineers. How PulsAPI monitoring works

Status report

BuildingLink Status Summary

As of 14:30 UTC on 9 November 2026, BuildingLink is operational. PulsAPI checked BuildingLink's official status page and found 11 of 11 components operational, with no active incidents. Over the last 30 days PulsAPI measured 100.00% uptime for BuildingLink, counting degraded performance as up. The latest incident, "Service Interruption - Send Email", was on Oct 14, 2026 and lasted 17h 36m.

Cite as: PulsAPI, “BuildingLink status”, checked 9 November 2026, 14:30 UTC. https://www.pulsapi.com/services/buildinglink

BuildingLink Component Status

The main BuildingLink systems on this page. All 11 are operational right now.

11operational
Apps » Geo
Operational
Apps » Resident
Operational
Apps » Valet
Operational

8 more components tracked

Their status is in the bar above. Free accounts see every component by name.

Also tracking Services » ConciergeLink, Services » Email, Services » KeyLink, Services » TimeTracker, Sites » Help Site, Sites » Management Portal, Sites » Public Display, Sites » Resident Portal.

See all of them free

Component statuses may change independently during partial outages.

Recent BuildingLink Outages & Incidents

Incident history from the official BuildingLink status page, including resolution updates.

Service Interruption - Send EmailResolved Oct 14, 2026 · 17h 36mResolved

This incident has been resolved. --- [2026-10-14T17:13:36.060-04:00] (identified) The issue has been identified and a fix is being implemented. --- [2026-10-14T15:29:59.931-04:00] (investigating) We have received reports of site performance issues in the Send Email module resulting in drafts not saving and emails not sending. Our team is actively investigating and will resolve this issue as soon as possible. EN COURS D'INVESTIGATION : Nous avons reçu des signalements concernant des problèmes de performance du site dans le module d'envoi d'e-mails, entraînant l'impossibilité d'enregistrer les brouillons et d'envoyer les e-mails. Notre équipe enquête activement et résoudra ce problème dans les plus brefs délais. INVESTIGANDO: Hemos recibido informes sobre problemas de rendimiento en el módulo de envío de correos electrónicos, lo que impide guardar borradores y enviar mensajes. Nuestro equipo está investigando activamente la situación y resolverá el problema lo antes posible.

Service InterruptionResolved Oct 7, 2026 · 6h 33mResolved

This incident has been resolved. --- [2026-10-07T12:04:00.477-04:00] (monitoring) A fix has been implemented and we are monitoring the results. SURVEILLANCE : Un correctif a été mis en place et nous surveillons les résultats. MONITOREO: Se ha implementado una solución y estamos monitoreando los resultados. --- [2026-10-07T11:28:37.752-04:00] (investigating) We have received reports of site performance issues resulting in server errors and/or pages not loading. Our team is actively investigating and will resolve this issue as soon as possible. EN COURS D'INVESTIGATION : Nous avons reçu des rapports faisant état de problèmes de performance du site entraînant des erreurs de serveur et/ou des pages ne se chargeant pas. Notre équipe enquête activement et résoudra ce problème dès que possible. INVESTIGANDO: Hemos recibido informes sobre problemas de rendimiento del sitio que resultan en errores del servidor y/o en que las páginas no se cargan. Nuestro equipo está investigando activamente y resolverá este problema lo antes posible.

KeyLinkResolved Oct 3, 2026 · 94h 22mResolved

This incident has been resolved. --- [2026-10-03T13:05:13.109-04:00] (investigating) We have received reports from customers having issues opening the KeyLink program. If your building is affected and you have the administrative password for the computer, or if your computer is managed by your local IT: 1, Close the KeyLink program entirely. 2. When re-opening, right-click on the KeyLink program, select "Run as administrator" and re-open. 3. You will be prompted to input the Administrative password, and the program should open as expected. If you do not have the Administrative Password for your computer, you can call our Support Team at 877-501-7117 and leave us a message. Our team will call back as soon as possible. Thank you for your patience while we work to get this resolved. ENQUÊTE EN COURS : Nous avons reçu des signalements de clients rencontrant des difficultés à ouvrir le programme KeyLink. Si votre immeuble est concerné et que vous disposez du mot de passe administrateur de l'ordinateur, ou si votre ordinateur est géré par votre service informatique local : 1. Fermez complètement le programme KeyLink. 2. Pour le rouvrir, faites un clic droit sur le programme KeyLink, sélectionnez « Exécuter en tant qu'administrateur », puis rouvrez-le. 3. Vous serez invité à saisir le mot de passe administrateur, et le programme devrait s'ouvrir normalement. Si vous ne disposez pas du mot de passe administrateur de votre ordinateur, vous pouvez appeler notre équipe d'assistance au 877-501-7117 et nous laisser un message. Notre équipe vous rappellera dans les plus brefs délais. Merci de votre patience pendant que nous travaillons à résoudre ce problème. EN INVESTIGACIÓN: Hemos recibido reportes de clientes que tienen problemas para abrir el programa KeyLink. Si su edificio está afectado y usted tiene la contraseña de administrador de la computadora, o si su computadora es administrada por su departamento de TI local: 1. Cierre completamente el programa KeyLink. 2. Al volver a abrirlo, haga clic derecho en el programa KeyLink, seleccione "Ejecutar como administrador" y ábralo de nuevo. 3. Se le pedirá que ingrese la contraseña de administrador, y el programa debería abrirse normalmente. Si no tiene la contraseña de administrador de su computadora, puede llamar a nuestro equipo de soporte al 877-501-7117 y dejarnos un mensaje. Nuestro equipo le devolverá la llamada lo antes posible. Gracias por su paciencia mientras trabajamos para resolver este problema.

BuildingLink Uptime History

Daily uptime recorded by PulsAPI over the last 90 days, with the days that carried a BuildingLink incident marked. Each day is measured from our own checks, so the record continues even when the vendor publishes nothing.

Uptime history91 days observed
Aug 11100.00% average · 17 days with incidentsNov 9

Going further back: BuildingLink uptime by month and every recorded BuildingLink outage.

Live BuildingLink Outage Reports

Problems reported by engineers using BuildingLink. Reports often appear 10 to 20 minutes before the official status page moves, and stay on this page for 90 days.

Reports, last 24 hours0 total
24h agoNothing reportednow

No BuildingLink problems reported yet.

Something wrong with BuildingLink on your end?

Reports are anonymous, take about ten seconds, and help the next engineer who checks.

About BuildingLink

Is BuildingLink down? BuildingLink reports live availability for 14 components at status.buildinglink.com, among them Email, Geo and Sites. Track BuildingLink outages, degradations and past incidents here, with uptime history and alerts across your SaaS stack.

Over the past 30 days, PulsAPI has measured BuildingLink uptime at 100.00%. Response times, incident history, and SLA tracking for BuildingLink are available on the PulsAPI dashboard.

BuildingLink Status FAQ

Is BuildingLink down right now?

The verdict at the top of this page comes from the latest poll of the official BuildingLink status feed and refreshes automatically, so you are not looking at a stale cached answer. PulsAPI re-checks it every 60 seconds.

What should I do if BuildingLink is not working?

Check the component list on this page first to see if your failure matches a known outage. If it does, you can report the issue for other engineers, follow the incident timeline for vendor updates, and run any fallback your app supports until BuildingLink recovers.

How do I check BuildingLink uptime history?

PulsAPI tracks BuildingLink uptime over 30, 60, and 90-day rolling windows. The current 30-day uptime is 100.00%. The 90-day uptime strip on this page is public: no account needed. A free account adds alerts whenever BuildingLink changes state, plus 15 days of incident detail; Pro extends that to 90 days and Business to 13 months.

How fast does PulsAPI detect BuildingLink outages?

PulsAPI reads the official BuildingLink status page. PulsAPI re-checks it every 60 seconds. Alerts reach Slack, Discord, Microsoft Teams, PagerDuty, or email once a change has held for 5 minutes, so a one-minute blip does not page you.

Does PulsAPI track individual BuildingLink components?

Yes. PulsAPI monitors 11 individual BuildingLink components, so you can see which service or region is affected instead of a generic "service degraded" banner.

Can I get alerts when BuildingLink goes down?

Yes. Create a free account and subscribe to BuildingLink: the free plan covers three services with unlimited email alerts and no monthly notification cap. Paid plans lift the monitor limit entirely (Pro and above do not meter how many vendors you watch) and route the same alerts into Slack, Discord, Microsoft Teams, PagerDuty and webhooks.

How do I report an issue with BuildingLink to the community?

Click "Report an issue" at the top of this page, pick the issue type and severity, and optionally add your region and a short note. Reports are anonymous and help other engineers spot BuildingLink problems early. Official status pages often lag real incidents by 10 to 20 minutes.

Is there a free way to monitor BuildingLink?

Yes. The free plan covers 3 monitored services with unlimited email alerts, permanently, so BuildingLink plus two more costs nothing. Every new account also opens with a 30-day Business trial (unlimited monitors, Slack alerts, SLA reporting) with no credit card.

Track BuildingLink with the rest of your stack

2660+ vendors in one dashboard, and an email the moment any of them changes state. Three free, and no monitor limit at all from $29/mo, unlike the alternatives, which keep charging by the monitor.

Start free, 3 services